Tools!

[tx_shooter]

Fail Fail Fail...

no link.

 

[Silverback]

Installed a Lock-n-Lube on my Milwaukee M18 grease gun. Getting the old fitting off was a pita. But a vice and a large plier wrench and it’s off.

 

[Anathollo]

I didn't know Milwaukee made a detailing light. @tex

Milwaukee M12 12-Volt Lithium-Ion Cordless LED Paint and Detailing Color Match Light 2127-20 - The Home Depot

Complete your professional cable crimping applications with the selection of this Milwaukee M LithiumIon Cordless LED Paint and Detailing Color Match Light.

www.homedepot.com

 

[Silverback]

Took some 1/4 plate steel and created an axle saddle for a bottle jack. Not done yet, need to clean it up all pretty and paint it. Thinking about adding 3 set bolts in the collar that fits around the bottlejack to allow it to be a bit more secure. We'll see once its done and I test it out. Will most likely build another for the SuperDuty as I replaced its OEM jack with a larger bottle jack. Need to measure the SD axle though to see how large its diameter is.

 

[Silverback]

Done with one... for now. Letting the Steel-It dry.

 

[Silverback]

Like a glove!!

 

[Anathollo]

My mom wants a new drill & impact for her house so I'm giving her my barely used M12 non-fuel impact & drill. So I ordered a new M12 Fuel drill for me to use around the house that came with a 2.0A, 4.0A & charger as well as a free M12 tool (so I got the M12 3/8" ratchet as well). I'm giving my mom the brand new batteries and charger.
The difference between the two drills is the non-fuel is a Toyota Camry and the Fuel drill is a Ferrari in terms of performance.

 

[balakay]

I’m a big fan of Knipex but man their wire strippers suck. These Milwaukees are so much nicer.

 

[Anathollo]

I’m a big fan of Knipex but man their wire strippers suck. These Milwaukees are so much nicer.View attachment 55786

I had those and the first non-copper wire I cut ruined the cutters. Pissed me off so bad I gave em to one of my workers.

 

[Silverback]

Picked up some torque adapters for my trail bag. Ability to add torque wrench capabilities to a standard ratchet. I need to reinstall my RCD axle up front so I will use one of these and then compare with my "good" torque wrench.

 

[Anathollo]

She sucks like a $5 whore. Go get one if you're in the DeWalt eco system. It's worth the $99 on sale with all of the attachments it comes with.

 

[Anathollo]

I was on the fence about keeping this battery but once I got it in hand, I can say DeWalt has a winner with this battery right here. It feels super robust and better packaged than the old battery.

I don't know how I cracked this battery case this bad but she's still running strong. I'll run her till she gives up the ghost

 

[Silverback]

Pretty cool.. but surprised he didn't use a Milwaukee tape measure.

 

[tx_shooter]

Milwaukee finally made the packout box I have been waiting for with this setup. I picked one up for my portable reloading setup. Now I need to decide what to do with the old tray box.

 

[Silverback]

I saw some YouTube video where the guy built out the back of his F150 as a sleeping area. He used a couple packout boxes with drawers like that. Pretty slick.

 

[tx_shooter]

Debating mounting them to my rolling shop table.

 

[Silverback]

I had drawers near a work table once... I found the grinder shavings, saw dust, etc to be a PITA and get into the drawers too easily.

Sleeping area setup I mentioned.

 

[tx_shooter]

yeah, shavings and dust would be a big PITA. I am doing some cleanup/ cleanout in the garage to make room for a couple new toys. Hopefully something will click.

 

[AlienXtx]

Here ya go fags

 

[Anathollo]

Here ya go fags
View attachment 57071

I mean Makita has one and it's supposedly a really good coffee maker...