Tools!

PSU Taco85

Well-Known Member
I picked up what some might call "Superman's thumbnail" to add to my drawer of panel popping tools and the like
IMG_2296.JPG
 

Silverback

Lima Gulf Bravo Foxtrot Juliet Bravo
I need one of those. I have a couple sets of the plastic panel popper and trim remover combos.
 

CowboyTaco

Well-Known Member
I picked up a 1.75” tube notching jig from 911 Motorsports. This thing is nice.

View attachment 66768

I have a friend who owns a fab shop in FL. He designed something very similar to that when 3d printers first hit the market. He was running several printers 24/7 printing and selling those until some chinese company ripped off his design and started selling them cheaper.
 

Silverback

Lima Gulf Bravo Foxtrot Juliet Bravo
Picked up two 40x24 fixture tables on casters. Vevor brand. Similar to the HF Ttanium tables but a smidge larger and already on casters. I plan to beef them up a bit and use them to build the sliders. Will be nice to clamp things down for a change.

IMG_4989.jpeg
 

Silverback

Lima Gulf Bravo Foxtrot Juliet Bravo
I need to pick up some steel to reinforce the top, probably pic up some more fixture to hold tubing in place and a few more clamps. I bought some 5/8” cold rolled to cut into small 2” sections and weld to the bottom of various clamps and vice grips to make my own. But it should do the trick.
IMG_4991.jpeg


Added a cross piece for grinder storage and some bins for fixtures.

IMG_4993.jpeg

IMG_4994.jpeg
 
Last edited:

Silverback

Lima Gulf Bravo Foxtrot Juliet Bravo
Picked up 40 fixture pins to keep shit in place. Used 4 of them and welded Jorgenson clamps to them. I think I'll swing by HF tomorrow and pick up 4 more and do the same. I was going to use the 5/8th round stock I got but I needed something with a lip on it to prevent it from falling all the way through.

IMG_5119.jpg


IMG_5118.jpg
 
Top